New 140/140 AWD Motor Grader For Sale in Georgia

Engine

Net Power Range (Tier 4) 179 hp

Engine Model Cat® C9.3

Bore 4.5 in

Stroke 5.9 in

Speed at Rated Power 2,000 rpm

Standard Capability 109 °F

Maximum Torque - VHP Plus 840 lb/ft

VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 hp

VHP Plus - Gear - Net Power - Forward 2nd 189 hp

VHP Plus - Gear - Net Power - Forward 5th 215 hp

VHP Plus - Gear - Net Power - Forward 3rd 200 hp

VHP Plus - Gear - Net Power - Forward 8th 231 hp

Torque Rise 38%

VHP Plus - Gear - Net Power - Reverse 2nd 189 hp

VHP Plus - Gear - Net Power - Forward 1st 179 hp

VHP Plus - Gear - Net Power - Forward 6th 220 hp

VHP Plus - Gear - Net Power - Reverse 1st 179 hp

VHP Plus Range - Net 133-172 kW (179-231 hp)

Emissions U.S. EPA Tier 4 Final/EU Stage V

VHP Plus - Gear - Net Power - Forward 7th 225 hp

VHP Plus Range - Net - Metric 133-172 kW (181-234 hp)

VHP Plus - Gear - Net Power - Forward 4th 210 hp

Base Power (1st Gear) - Net - Metric 181 hp

High Ambient - Fan Speed - Standard 1,400 rpm

Displacement 567.5 in³

Number of Cylinders 6

Derating Altitude 10000 ft

High Ambient - Fan Speed - Maximum 1,550 rpm

High Ambient - Fan Speed - Minimum 500 rpm

High - Ambient Capability 122 °F

Weights

Operating Weight - Typically Equipped 42647 lb

Gross Vehicle Weight - Maximum - Front Axle 17075 lb

Gross Vehicle Weight - Maximum - Rear Axle 38069 lb

Operating Weight - Typically Equipped - Front Axle 12055 lb

Operating Weight - Typically Equipped - Rear Axle 30592 lb

Gross Vehicle Weight - Base - Front Axle 9343 lb

Gross Vehicle Weight - Base - Rear Axle 28077 lb

Gross Vehicle Weight - Maximum - Total 55144 lb

Gross Vehicle Weight - Base - Total 37420 lb

Operating Weight - Typically Equipped - Total 42647 lb

Power Train

Forward/Reverse Gears 8 Forward/6 Reverse

Transmission APECS, Direct Drive, Powershift

Brakes - Service Multiple Oil Disc

Brakes - Service - Surface Area 3565 in²

Brakes - Parking Multiple Oil Disc

Brakes - Secondary Dual Circuit

Moldboard

Blade Width 12 ft

Moldboard - Height 24 in

Moldboard - Thickness 0.87 in

Arc Radius 16.3 in

Throat Clearance 6.5 in

Cutting Edge Width 6 in

Cutting Edge Thickness 0.6 in

End Bit - Width 6 in

End Bit - Thickness 0.6 in

Blade Pull - Base GVW 25269 lb

Blade Pull - Maximum GVW 34262 lb

Blade Down Pressure - Base GVW 16038 lb

Blade Down Pressure - Maximum GVW 29309 lb

Moldboard - Blade Width 12 ft

Hydraulic System

Circuit Type Parallel

Pump Type Variable Piston

Pump Output 55.7 gal/min

Maximum System Pressure 3500 psi

Reservoir Tank Capacity 16.9 gal (US)

Standby Pressure 885 psi

Operating Specifications

Top Speed - Forward 29 mile/h

Top Speed - Reverse 23 mile/h

Turning Radius - Outside Front Tires 25.59 ft

Steering Range - Left/Right 50°

Articulation Angle - Left/Right 20°

Forward - 1st 2.5 mile/h

Forward - 2nd 3.4 mile/h

Forward - 3rd 5 mile/h

Forward - 4th 6.9 mile/h

Forward - 5th 10.6 mile/h

Forward - 6th 14.5 mile/h

Forward - 7th 19.9 mile/h

Forward - 8th 29 mile/h

Reverse - 1st 2 mile/h

Reverse - 2nd 3.7 mile/h

Reverse - 3rd 5.4 mile/h

Reverse - 4th 8.4 mile/h

Reverse - 5th 15.7 mile/h

Reverse - 6th 23 mile/h

Service Refill

Fuel Capacity 104 gal (US)

Cooling System 15 gal (US)

Hydraulic System - Total 26.4 gal (US)

Hydraulic System - Tank 16.9 gal (US)

Diesel Exhaust Fluid 5.8 gal (US)

Transmission - Differential - Final Drives 18.5 gal (US)

Engine Oil 7.9 gal (US)

Tandem Housing - Each 20 gal (US)

Front Wheel Spindle Bearing Housing 0.13 gal (US)

Circle Drive Housing 1.8 gal (US)

Frame

Drawbar - Width 3 in

Circle - Diameter 60.2 in

Circle - Blade Beam Thickness 1.6 in

Drawbar - Height 6 in

Front Frame Structure - Height 12.6 in

Circle - Height 5.4 in

Front Frame Structure - Width 12 in

Drawbar - Thickness 0.5 in

Front-Top/Bottom Plate - Width 12 in

Front-Top/Bottom Plate - Thickness 0.87 in

Front Axle - Height to Center 23.5 in

Front Axle - Wheel Lean - Left/Right 18°

Front Axle - Total Oscillation per Side 32Â°

Tandems

Height 19.9 in

Width 7.9 in

Sidewall Thickness - Inner 0.63 in

Sidewall Thickness - Outer 0.71 in

Drive Chain Pitch 2 in

Wheel Axle Spacing 60 in

Tandem Oscillation - Front Up 15°

Tandem Oscillation - Front Down 25°

Blade Range

Circle Centershift - Right 28.7 in

Circle Centershift - Left 27.4 in

Moldboard Sideshift - Right 26 in

Moldboard Sideshift - Left 20.1 in

Maximum Blade Position Angle 90°

Blade Tip Range - Forward 40°

Blade Tip Range - Backward 5°

Maximum Shoulder Reach Outside of Tires - Right 77.9 in

Maximum Shoulder Reach Outside of Tires - Left 70.5 in

Maximum Lift Above Ground 18.9 in

Maximum Depth of Cut 28.1 in

Ripper

Ripping Depth - Maximum 16.8 in

Ripper Shank Holder Spacing 21 in

Ripper Shank Holders 5

Penetration Force 20812 lb

Pry-Out Force 27794 lb

Machine Length Increase, Beam Raised 40.6 in

Scarifier

Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in

Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in

Mid, V-Type - Scarifier Shank Holders 11

Rear - Scarifying Depth, Maximum 16.8 in

Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in

Front, V-Type - Working Width 47.4 in

Mid, V-Type - Working Width 46.6 in

Mid, V-Type - Scarifying Depth, Maximum 11.5 in

Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in

Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11

Rear - Working Width 84 in

Rear - Scarifier Shank Holders 9

Rear - Scarifier Shank Holder Spacing 10.5 in

Dimensions

Height - Top of Cab 130 in

Length - Counterweight to Ripper 399 in

Width - Outside Front Tires 98.9 in

Length - Front Axle to Mid Tandem 241 in

Length - Front Tire to Rear of Machine 351 in

Length - Front Axle to Moldboard 100 in

Length - Between Tandem Axles 60 in

Width - Outside Rear Tires 98.9 in

Width - Tire Center Lines 84.3 in

Height - Front Axle Center 23.5 in

Height - Exhaust Stack 128 in

Height - Top of Cylinders 120 in

Ground Clearance - Rear Axle 13.3 in

Standards

Brakes ISO 3450

Sound ISO 6394; ISO 6395

Steering ISO 5010

ROPS/FOPS ISO 3471/ISO 3449

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.

BETTER COMFORT AND CONTROL

Visibility is key to your safety, efficiency and quality of work. The motor grader delivers with angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. Optional rear camera further enhances lines of sight.
The most comfortable cab in the industry.
Joystick controls reduce hand and arm movement by 78%, which helps to lower operator fatigue.
Easy-reach rocker and control switches
Standard Cat Comfort Series suspension seat.
Control pods adjust electronically - easy to set ideal operating position.
Isolation mounts reduce sound and vibration for more relaxed environment.
High capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear.
Optional deluxe radio with CD features MP3 and Bluetooth technology.
In-dash instrument cluster houses easily read, high-visibility gauges and warning lamps keep you aware of critical system information.
Two electro-hydraulic joysticks make operation easy and comfortable. Adjustable control pods ensure they are positioned for optimal comfort, visibility and operation.
Joystick Functions -

Left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float.
Right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock. Joystick lean angle mirrors the steer tires' turning angle.

Brake tensioning system holds the joystick in position until the operator moves it.
Steering control automatically reduces steering sensitivity at higher ground speeds for predictable control.
Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped).
Proven load-sensing and advanced electro-hydraulics give you superior implement control and responsive hydraulic performance that makes operators' jobs easier.
Continuously matching hydraulic flow/pressure to power demands reduces heat and optimizes power.
Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.
Hydraulic flow is proportioned to give you confidence that all implements operate simultaneously without slowing engine or implement speed.
Blade Float allows the blade to move freely under its own weight.
Float both cylinders, to allow blade can follow the contours of the ground.
Float one cylinder to permit the toe of the blade to follow a hard surface while the operator controls slope with the other cylinder.
Large, independent hydraulic oil supplies prevent cross-contamination and provide proper cooling, reducing heat build-up and extending component life.
Cat XT™ hose allows high pressures for maximum power and reduced downtime.
Articulation Return-to-Center automatically returns the machine to a straight frame position from any angle with the touch of a button.
Choose the blade lift modulation mode that best fits your application or operating style: fine, normal, or coarse.

PERFORMANCE AND PRODUCTIVITY

Cat C9.3 engine delivers the performance you need to maintain consistent grading speeds for maximum productivity.
Engine technology reduces emissions, lowers combustion chamber temperatures and optimizes combustion to generate more work output from every unit of fuel.
Hydraulic demand fan automatically adjusts according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.
Electronic Throttle Control improves productivity providing the best match of power and torque for the demands of each application.* Engine Idle Shutdown feature can be software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.
Optional Reversing Fan helps clear debris from cooling system without need to stop the machine from work.
Standard Automatic Differential Lock/Unlock unlocks the differential during a turn and re-locks when straight for easier operation and to help protect the power train.
Full Electronic Clutch Pressure Control system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.
Programmable AutoShift option simplifies operation by allowing the operator to program the transmission to shift at optimal points to match each application.
Eco mode can save fuel by reducing engine speed so the machine works in a more efficient range.
Power Shift Countershaft Transmission is matched to the Cat engine to maximize power to the ground.
Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.
All Wheel Drive (AWD) transfers power to the ground as needed, allowing you to work more efficiently with mud, gravel, sand and snow. Increased traction reduces slippage across the cross slope.
Sealed spindle keeps front axle bearings lubricated and protected from contaminants. Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending life.
Bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.
Oil-bath, multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to provide dependable stopping power and longer life.

HEAVY DUTY CONSTRUCTION

One-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down.
Articulation hitch features a large tapered roller bearing to carry loads evenly. The bearing is sealed preventing contamination and a locking pin prevents articulation during service or transport.
Drawbar, circle and moldboard are designed to make it easy for you to keep the components tight.
Shims and patented top-adjust wear strips are easy to add or replace, dramatically reducing downtime.
Nylon composite wear inserts maximize circle torque and component life.
Sacrificial brass wear strips between the blade mounting group and moldboard can be easily adjusted and replaced.
Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise control.
With an aggressive blade angle, optimized moldboard curvature and large throat clearance, you work more efficiently by allowing material to roll more freely along the blade.
Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts provide greater moldboard reliability and long service life.
Link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.

TECHNOLOGY THAT GETS WORK DONE

Grade technologies combine digital design data, in-cab guidance, and automatic blade controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.
Cat Grade with Cross Slope is an optional, fully integrated, factory installed system that helps operators maintain desired cross slope by automatically controlling one side of the blade. System is job-ready from day one, and scalable for the future with upgrade kits that provide additional 2D and/or 3D control.
Attachment Ready Option can be ordered as a factory- or dealer-installed option. Includes built-in mounting points and internal wiring, to facilitate installation of grade control system.
Cat Grade uses positioning and guidance technologies, machine sensors, and automatic blade control to help operators get to grade faster, easier and more efficiently.
In-cab guidance gives operators detailed information to work confidently and achieve greater accuracy, in fewer passes, using less material.
Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods.
Grade stakes and checkers are minimized, helping to make the work site safer and more cost effective.
Grade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).
Cat Product Link™ takes guesswork out of equipment management with remote monitoring capabilities for one machine or an entire fleet.
Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.
Tracks asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface.
Smart Machine Systems enhance productivity -

Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.
Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.
Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.
Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.

BUILT-IN SAFETY FEATURES

Operator Presence Monitoring System keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.
Speed Sensitive Steering makes steering less sensitive as ground speed increases for enhanced control.
Secondary electric hydraulic steering pump automatically engages in case of a drop in steering pressure allowing operator to steer the machine to a stop.
Hydraulic lockout disables all implement functions while still providing machine steering control. This is especially useful while roading.
Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.
Perforated steel tandem walkways and convenient grab rails provide a sturdy platform when moving on, off and around the machine.
Circle Drive Slip Clutch protects the drawbar, circle and moldboard from shock loads if the blade encounters an immovable object and reduces the possibility of abrupt directional changes in poor traction conditions.
Blade Lift Accumulators absorb impact loads by allowing vertical blade travel. This optional feature reduces wear and impact loading for enhanced operator safety.
Safety Features -

Optional rearview camera with in-cab monitor
Grouped, ground level service points
Laminated front window glass
Optional LED Lighting
Ground-level electrical disconnect switch
Ground-level engine shutoff switch
Anti-glare paint eases night operation
Front and rear fenders

TOP-TIER SERVICE AND SUPPORT

Cat motor graders are designed to help you increase uptime and reduce costs:
Grouped service points and extended service intervals save maintenance time.
New optional LED lights in the left hand compartment facilitates machine servicing in low light.
Your Cat dealer provides support that is second to none. From machine selection and purchase to training, maintenance support and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running.

SUSTAINABILITY

The Cat® C9.3 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cat® Grade helps reduce fuel burn and greenhouse gas emissions by enabling you to achieve grade faster and more accurately by automating blade actions.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.
Cat® Reman parts are a sustainable choice. New Cat parts are designed with the potential to have more than one life, so Cat Reman parts are truly remanufactured — not just repaired, rebuilt or reconditioned. Because the process ensures the latest design changes are incorporated into Cat Reman parts, you get like new quality and outstanding performance at lower cost.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).