New 305 CR Mini Hydraulic Excavator For Sale in Georgia

Engine

Net Power 45 hp

Engine Model C1.7 Turbo

Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 45 hp

Note Advertised power is tested per the specified standard in effect at the time of manufacture.

Gross Power - 2,400 rpm - SAE J1995:2014 48.4 hp

Stroke 3.9 in

Bore 3.3 in

Displacement 101 in³

Emissions The Cat® C1.7 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note (2) Net power advertised is the power available at the flywheel when the engine is at the rated speed of 2400 rpm and the engine is installed with the factory configured fan, air intake system, exhaust system and alternator with a minimum alternator load.

Weights

Operating Weight 12688 lb

Minimum Operating Weight with Canopy* 11016 lb

Note (1) *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight.

Minimum Operating Weight with Cab* 11234 lb

Maximum Operating Weight with Cab** 12688 lb

Maximum Operating Weight with Canopy** 12469 lb

Note (2) **Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket.

Dimensions - Long Stick

Dig Depth 144.5 in

Stick Length 63 in

Track Width 78 in

Maximum Blade Depth 23.4 in

Maximum Dump Clearance 151.4 in

Boom Swing - Left 615 mm

Boom Swing - Right 34.1 °

Swing Bearing - Height 24.4 in

Boom Height - Shipping Position 74.6 in

Boom In Reach 101.6 in

Maximum Reach 235.8 in

Track Belt/Shoe Width 15.7 in

Maximum Reach - Ground Level 229.7 in

Maximum Blade Height 15.2 in

O/A Shipping Height 100.4 in

Tail Swing without Counterweight 43.1 in

O/A Undercarriage Length 101.6 in

Tail Swing with Counterweight 47.2 in

Vertical Wall 100.8 in

Note *Overall Shipping Length depends on blade position during shipment.

Overall Shipping Length* 210.2 in

Maximum Dig Height 210.8 in

Ground Clearance 13.2 in

Swing System

Boom Swing - Left 72 Degrees

Machine Swing Speed 9 r/min

Boom Swing - Right 50 Degrees

Dimensions - Standard Stick

Maximum Dig Height 205.3 in

Maximum Blade Height 15.2 in

Dig Depth 134.6 in

Boom Swing - Right 34.1 °

Maximum Reach - Ground Level 220.1 in

Tail Swing without Counterweight 43.1 in

Boom Height - Shipping Position 71.7 in

Maximum Blade Depth 23.4 in

Maximum Reach 226.6 in

Boom Swing - Left 24.2 °

Overall Shipping Length* 208.9 in

O/A Undercarriage Length 101.6 in

Swing Bearing - Height 24.4 in

Stick Length 53.2 in

Track Belt/Shoe Width 15.7 in

Boom In Reach 101.2 in

Vertical Wall 91.9 in

Tail Swing with Counterweight 47.2 in

Maximum Dump Clearance 145.7 in

O/A Shipping Height 100.4 in

Note *Overall Shipping Length depends on blade position during shipment.

Ground Clearance 13.2 in

Service Refill Capacities

Hydraulic Tank 16 gal (US)

Fuel Tank 17 gal (US)

Engine Oil 1.6 gal (US)

Hydraulic System 20 gal (US)

Cooling System 2.9 gal (US)

Travel System

Ground Pressure - Minimum Weight 4 psi

Maximum Traction Force - Low Speed 11353 lbf

Ground Pressure - Maximum Weight 4.7 psi

Travel Speed - Low 1.7 mile/h

Maximum Traction Force - High Speed 5553 lbf

Travel Speed - High 3.1 mile/h

Gradeability - Maximum 30 degrees

Blade

Angle Blade Width 78 in

Straight Blade Height 15.4 in

Straight Blade Width 78 in

Angle Blade Height 15.7 in

Angle Blade - Left 25 degrees

Angle Blade - Right 25 degrees

Sound

Average Exterior Sound Pressure (ISO 6395:2008) 97 dB(A)

Note *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed. **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Operator Sound Pressure (ISO 6396:2008) 76 dB(A)

Hydraulic System

Auxiliary Circuit - Secondary - Pressure 3843 psi

Pump Flow at 2,400 rpm 35 gal/min

Operating Pressure - Swing 2901 psi

Operating Pressure - Travel 3843 psi

Auxiliary Circuit - Secondary - Flow 7 gal/min

Digging Force - Stick - Standard 6362 lbf

Auxiliary Circuit - Primary - Pressure 3843 psi

Auxiliary Circuit - Primary - Flow 21 gal/min

Digging Force - Bucket 11061 lbf

Operating Pressure - Equipment 3843 psi

Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down.

Type Load Sensing Hydraulics with Variable Displacement Piston Pump

Digging Force - Stick - Long 5665 lbf

Certification - Cab and Canopy

Top Guard ISO 10262:1998 Level I

Roll Over Protective Structure (ROPS) ISO 12117-2:2008

Tip Over Protective Structure (TOPS) ISO 12117:1997

Weight Increase from Minimum Configuration

Counterweight 534 lb

Long Stick 75 lb

Steel Tracks with Pads 827 lb

Angle Blade 225 lb

Sustainability

Recyclability 96%

ALL DAY COMFORT

Choose either a canopy or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped as an upgrade option.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A COMPACT DESIGN

Strong lift and dig performance helps you get the job done faster. The compact radius design lets you access and work in the tightest areas. Dig-to-blade and dozer blade float allows for easy clean up. An angle blade is also an option for finished grading and easier backfilling applications.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt with optional seat belt reminder system are just a couple of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

UNMATCHED DEALER SUPPORT

Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.