New 308 CR Mini Hydraulic Excavator For Sale in Georgia

Engine

Net Power 69.5 hp

Engine Model Cat C3.3B

Stroke 4.7 in

Bore 3.7 in

Gross Power - SAE J1995 74.3 hp

Displacement 203 in³

Rated Net Power - 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 69.5 hp

Weights

Operating Weight 20077 lb

Note (1) *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket.

Note (2) **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.

Maximum Operating Weight with Cab** 20077 lb

Minimum Operating Weight with Cab* 18610 lb

Weight Increase from Minimum Configuration

Steel Tracks with Pads 752 lb

Counterweight 552 lb

Long Stick 146 lb

Travel System

Maximum Traction Force - High Speed 6250 lb

Ground Pressure - Maximum Weight 5.8 psi

Ground Pressure - Minimum Weight 5.4 psi

Travel Speed - High 3.2 mile/h

Travel Speed - Low 1.9 mile/h

Maximum Traction Force - Low Speed 15175 lb

Gradeability - Maximum 30 degrees

Service Refill Capacities

Fuel Tank 39 gal (US)

Hydraulic System 29 gal (US)

Hydraulic Tank 14 gal (US)

Cooling System 2.6 gal (US)

Engine Oil 3 gal (US)

Hydraulic System

Digging Force - Bucket 13946 lb

Operating Pressure - Travel 4134 psi

Operating Pressure - Swing 3626 psi

Operating Pressure - Equipment 4134 psi

Digging Force - Stick - Long 8032 lb

Type Load Sensing Hydraulics with Variable Displacement Piston Pump

Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down.

Pump Flow at 2,400 rpm 44 gal/min

Digging Force - Stick - Standard 9509 lb

Maximum Auxiliary Circuit - Primary - Pressure at Pump 4134 psi

Maximum Auxiliary Circuit - Secondary - Pressure at Pump 4134 psi

Maximum Auxiliary Circuit - Primary - Flow at Pump 35 gal/min

Maximum Auxiliary Circuit - Secondary - Flow at Pump 9 gal/min

Swing System

Machine Swing Speed 10.6 r/min

Boom Swing - Right 50 degrees

Boom Swing - Left 60 degrees

Blade

Height 17 in

Width - Standard 90.6 in

Width - Wide 96.5 in

Certification - Cab

Top Guard ISO 10262:1998 (Level I)

Roll Over Protective Structure (ROPS) ISO 12117-2:2008

Tip Over Protective Structure (TOPS) ISO 12117:1997

Sound

Operator Sound Pressure (ISO 6396:2008) 72 dB(A)

Note European Union Directive "2000/14/EC"

Average Exterior Sound Pressure (ISO 6395:2008) 99 dB(A)

Dimensions - Standard Stick

Cab Height 100 in

Vertical Wall 117.8 in

Boom In Reach 120.4 in

Tail Swing with Counterweight 62.4 in

Boom Swing - Right 36.8 in

Track Belt/Shoe Width 17.7 in

Maximum Reach 281.1 in

Stick Length 71.7 in

Maximum Blade Height 14.6 in

Boom Swing - Left 23.8 in

Maximum Blade Depth 16 in

O/A Track Width 90.6 in

Maximum Dig Height 265.2 in

Maximum Dump Clearance 187.4 in

Maximum Reach - Ground Level 273.6 in

Tail Swing without Counterweight 57.1 in

O/A Undercarriage Length 113.4 in

Swing Bearing - Height 29.7 in

Ground Clearance 13.8 in

Dig Depth 161.7 in

Note *Boom Height when stick is pinned in transport position with no attachments.

Overall Shipping Length - with Counterweight 264 in

Note (1) **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.

Overall Shipping Length - without Counterweight 258.8 in

Note (2) ***With blade positioned at the rear of the machine.

Height - Boom Working - With Tools** 104.7 in

Height - Boom Transport - No Tools* 95.7 in

Dimensions - Long Stick

Dig Depth 182.8 in

Boom Swing - Left 23.8 in

Maximum Dig Height 277.1 in

Maximum Blade Height 14.6 in

Track Belt/Shoe Width 17.7 in

Cab Height 100 in

Tail Swing with Counterweight 62.4 in

O/A Undercarriage Length 113.4 in

Maximum Dump Clearance 199.7 in

Boom Swing - Right 36.8 in

Maximum Blade Depth 16 in

Ground Clearance 13.8 in

Stick Length 92.8 in

Maximum Reach 300.7 in

Maximum Reach - Ground Level 293.7 in

Boom In Reach 126.6 in

Swing Bearing - Height 29.7 in

O/A Track Width 90.6 in

Tail Swing without Counterweight 57.1 in

Vertical Wall 134 in

Note *Boom Height when stick is pinned in transport position with no attachments.

Note (2) ***With blade positioned at the rear of the machine.

Note (1) **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.

Height - Boom Transport - No Tools* 89 in

Height - Boom Working - With Tools** 120.1 in

Overall Shipping Length - without Counterweight 6872 mm (270.6 in)***

Overall Shipping Length - with Counterweight 6872 mm (270.6 in)***

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

Sustainability

Recyclability 96%

ALL DAY COMFORT

A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with Cat Stick Steer. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A MINI DESIGN

Increased lifting, swinging, travel and multi-functioning performance help you get the job done more efficiently, and blade float allows for easy clean up.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we‚Äôve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.

UNMATCHED DEALER SUPPORT

Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.

SUSTAINABILITY

The Cat® C3.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)