Height - Ground to Cab 8.75 ft
Height: Ground to Beacon** 9.33 ft
Height: Ground Axle Center** 1.67 ft
Height - Ground Clearance 1 ft
Length - Overall with Bucket 18.67 ft
Length: Rear Axle to Bumper 4.5 ft
Length: Hitch to Front Axle 3.5 ft
Length - Wheel Base 7.08 ft
Clearance - Bucket at 45° 8.25 ft
Clearance: Load over Height** 9.75 ft
Clearance - Level Bucket 10.5 ft
Height - Bucket Pin 11.17 ft
Height: Overall** 14.42 ft
Reach - Bucket at 45° 2.67 ft
Carry Height: Bucket Pin 1.25 ft
Dig Depth 0.45 ft
Width - Bucket 6.75 ft
Width - Tread Center 5.08 ft
Turning Radius - Over Bucket 15.08 ft
Width - Over Tires 6.67 ft
Turning Radius: Outside of Tires 13.17 ft
Turning Radius - Inside Tire 6.67 ft
Rack Angle at Full Lift 50°
Dump Angle at Full Lift 48°
Rack Angle at Carry 54°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^ 14752 lb
Tipping Load – Straight – ISO 14397-1 † 9581 lb
Tipping Load – Full Turn – ISO 14397-1 † 8141 lb
Operating Weight: Carriage and Tines ^^ 14391 lb
Tipping Load - Straight † 9753 lb
80% of Tip: Firm and Level EN474-3 †† 5438 lb
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Tipping Load - Full Turn - ISO 14397-1† 6800 lb
Length: Front Axle to Front of Coupler 4.75 ft