Height - Ground to Cab 8.5 ft
Height: Ground to Beacon** 9.08 ft
Height: Ground Axle Center** 1.58 ft
Height - Ground Clearance 1 ft
Length - Overall with Bucket 18.17 ft
Length: Rear Axle to Bumper 4.58 ft
Length: Hitch to Front Axle 3.58 ft
Length - Wheel Base 7.08 ft
Length: Front Axle to Front of Coupler 4.33 ft
Clearance - Bucket at 45° 7.83 ft
Clearance: Load over Height** 9.5 ft
Clearance - Level Bucket 9.92 ft
Height - Bucket Pin 10.67 ft
Height: Overall** 13.83 ft
Reach - Bucket at 45° 2.67 ft
Carry Height: Bucket Pin 1.17 ft
Dig Depth 3 in
Width - Bucket 6.75 ft
Width - Tread Center 4.67 ft
Turning Radius - Over Bucket 15 ft
Width - Over Tires 6.08 ft
Turning Radius: Outside of Tires 12.92 ft
Turning Radius - Inside Tire 6.75 ft
Rack Angle at Full Lift 51°
Dump Angle at Full Lift 50°
Rack Angle at Carry 46°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^ 12897 lb
Tipping Load – Straight – ISO 14397-1 † 8653 lb
Tipping Load – Full Turn – ISO 14397-1 † 7257 lb
Operating Weight: Carriage and Tines ^^ 12414 lb
Tipping Load - Straight † 7416 lb
Tipping Load - Full Turn † 6266 lb
80% of Tip: Firm and Level EN474-3 †† 5013 lb
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.